MikroTik SXT LTE6 kit CAT6 LTE Modem for Remote Areas Within Cellular Network Coverage
The SXT LTE6 is designed to bridge the connectivity gap in areas where customary networks fall short. With its advanced LTE chip and high-gain antenna, it reliably maintains a strong signal even in remote locations or when cell phones struggle to connect. This makes it ideal for powering essential services like internet access in rural settings or hard-to-reach properties.The CAT6 LTE modem delivers faster speeds through carrier aggregation, allowing the device to leverage multiple bands together. This ensures smoother performance during peak usage times and provides a stable connection where weaker signals would otherwise hinder productivity.
Its dual Ethernet ports, including a PoE-out-enabled second port, offer flexible connectivity options. You can extend your network or power secondary devices like IP cameras or sensors without additional wiring, simplifying setup and reducing costs. The inclusion of two Micro SIM slots adds a layer of redundancy, safeguarding against service outages or signal drops. built to handle a wide range of power inputs (18-57 V) and compliant with 802.3af/at standards, it's a durable, future-proof solution for both urban and rural environments. Whether you're monitoring remote assets or setting up a reliable internet link, the SXT LTE6 adapts to your needs without compromising performance.
- Robust LTE Performance - CAT6 modem and carrier aggregation boost speeds in crowded or weak signal areas.
- Power Flexibility - Supports wide voltage range (18-57 V) and PoE-out for easy device powering.
- Redundant Connectivity - dual SIM slots ensure backup links during outages or signal fluctuations.
- Efficient Setup - Two Ethernet ports streamline network expansion and device integration.
- Durable Design - 802.3af/at compliance and rugged build for reliable operation in varying conditions.
- dependent on Cellular Coverage - Performance may vary if LTE signal strength is insufficient.
- Signal Congestion risk - Carrier aggregation could lead to interference in extremely dense environments.
- Limited PoE-Out Capacity - Only the second Ethernet port supports PoE, restricting simultaneous power delivery.
- Dual SIM Complexity - Requires manual configuration for backup SIM switching or management.
- No Wired Backup - Relies solely on LTE and Ethernet for connectivity,with no alternative physical backup.
| Key Feature | Benefit |
|---|---|
| Carrier Aggregation (CAT6) | boosts speeds in crowded or rural areas |
| High-Gain Antenna | Strengthens signal for weak coverage zones |
| PoE-Out Ethernet Port | Power secondary devices without extra wiring |
| Dual Micro SIM Slots | Ensures backup connectivity for uninterrupted service |
| Wide Voltage Support (18-57 V) | Compatible with various power sources and environments |
Ubiquiti UniFi 6 Pro Access Point | US Model, wireless | PoE Adapter not Included (U6-Pro-US)
This high-performance access point is designed to deliver seamless connectivity for both home and office environments. With dual-band WiFi 6 capabilities, it combines a 5 GHz (4x4 MU-MIMO) band offering up to 4.8 Gbps throughput and a 2.4 GHz (2x2 MIMO) band providing 573.5 Mbps, it ensures fast, reliable data transfer even when multiple devices are active. The ability to support over 300 concurrently connected clients makes it ideal for busy households or small to medium-sized offices, while guest traffic isolation adds an extra layer of security, keeping your network safe and efficient. Setup is fast and intuitive with the UniFi Network application, allowing you to manage everything from your smartphone or computer.
Engineered for robust performance,the access point leverages full 4x4 MIMO technology with 160 MHz bandwidth to maximize wireless capacity and minimize latency. Its dual-band design optimizes signal strength and speed across different areas of your space, ensuring consistent coverage without bottlenecks. the included universal mounting plate, backing plate, and screw kit make installation straightforward, whether you're mounting it on a wall or ceiling. While the PoE adapter is sold separately, the device's compatibility with standard power sources ensures flexibility for various setups.
- Pros:
- High-speed dual-band WiFi 6 (802.11ax) for fast internet and streaming
- Supports over 300 devices simultaneously with minimal performance drop
- Guest traffic isolation enhances security and reduces congestion
- Easy setup and management via the UniFi Network app
- Includes mounting accessories for quick installation
- cons:
- PoE adapter must be purchased separately
- Higher price point compared to basic access points
| Feature | Detail |
|---|---|
| Throughput | 5.3 Gbps aggregate (4.8 Gbps 5 GHz + 573.5 Mbps 2.4 GHz) |
| Client Support | Over 300 concurrent clients |
| MIMO Technology | Full 4x4 MIMO with 160 MHz bandwidth |
| Security | Guest traffic isolation for enhanced protection |
| Installation | Includes mounting plate,backing plate,and screw kit |
TRENDnet AC1200 Dual Band poe Indoor access Point, MU-MIMO, 867 Mbps WiFi AC, 300 mbps WiFi N bands, Client bridge, Repeater Modes, Gigabit PoE LAN Port, Captive Portal for Hotspot, White, TEW-821DAP
TRENDnet's AC1200 Dual Band wireless access point delivers seamless connectivity for modern households, combining speeds of up to 867Mbps on the Wi-Fi 6 AC band with 300Mbps on wi-Fi 5 N for a total of 1167Mbps. Whether you're streaming, gaming, or video conferencing, its concurrent dual-band capability ensures smooth performance without lag, even when multiple devices are active. The inclusion of MU-MIMO technology allows the access point to handle data streams from multiple devices simultaneously, making it ideal for families or small offices with high demand. With advanced access control and QoS settings, you can prioritize critical tasks like voice calls or security cameras, while band steering automatically directs devices to the least congested network for optimal speed and reliability.
The low-profile design of this access point makes it discreet and easy to integrate into any room, featuring a wall or ceiling mount that keeps cables organized and out of sight. Its versatile operation in AP, Client Bridge, WDS AP, repeater, and other modes offers flexibility for expanding or managing your network, whether you're setting up a home office or optimizing your Wi-Fi coverage. Paired with TRENDnet Hive, a cloud-based management tool, you can monitor and adjust settings remotely, saving time and effort without needing additional hardware. The PoE port ensures stable, high-speed wired connections while also cutting down on installation costs, and the optional power port provides versatility for non-PoE setups.
- Pros
- Concurrent dual-band Wi-Fi speeds (AC + N) for reduced lag
- MU-MIMO technology boosts performance with multiple devices
- Advanced security and prioritization features (access control, QoS)
- Discreet, low-profile design with cable management options
- Wireless modes (AP, WDS, Repeater) for flexible network setup
- Remote management via TRENDnet Hive for hassle-free control
- Cons
- Requires subscription for full TRENDnet hive functionality
- Optional PoE port may need extra cabling for non-PoE installations
- band steering may not always optimize performance in every scenario
| Feature | Benefit |
|---|---|
| Wi-Fi 6 AC (867Mbps) + Wi-Fi 5 N (300Mbps) | High-speed, low-latency performance for demanding tasks |
| MU-MIMO support | Simultaneous data handling for multiple devices |
| Power over Ethernet (PoE) port | Stable wired connections with cost-effective installation |
| Low-profile design | Discreet, space-saving appearance for any surroundings |
| TRENDnet Hive compatibility | Remote management and monitoring without extra hardware |
| Product | Key Features | Pros | Cons |
|---|---|---|---|
|
Indoor Access Point |
|
|
|
Elevate Your Lifestyle
Surprise! While the MikroTik LTE6 kit excels in extreme remote areas, it's the TRENDnet AC1200 that steals the spotlight for rural efficiency. With MU-MIMO, PoE, and seamless cloud management, this access point isn't just a tool-it's a smart solution tailored for the challenges of off-grid connectivity. The winner? A blend of power, adaptability, and simplicity that makes rural Wi-Fi coverage both affordable and effective.
In our comparison of the MikroTik LTE6 kit, Ubiquiti UniFi 6 Pro, and TRENDnet AC1200, the TRENDnet model emerges as the standout choice for rural environments.Its dual-band performance, PoE support, and advanced features like MU-MIMO and cloud-based management offer a compelling balance of reliability and cost-efficiency.Meanwhile, the MikroTik excels in remote areas with LTE, while the UniFi is ideal for high-performance indoor setups.
MikroTik SXT LTE6 Kit CAT6 LTE Modem for Remote Areas
Reliable LTE connectivity in areas with no traditional infrastructure, ideal for remote and rural settings.
Ubiquiti UniFi 6 Pro Access Point | US Model
High-performance wireless connectivity with PoE support, designed for scalable and dense network environments.
TRENDnet AC1200 Dual Band PoE Indoor Access Point, MU-MIMO
Concurrent dual-band Wi-Fi performance, PoE compatibility, and TRENDnet Hive cloud management for effortless rural network setup and maintenance.
- Pros:
- Cons:
